Used Brill Luxus 38 reel lawn mower for sale with debris bag. The Brill Luxus 38 is a reel mower made in Germany weighing approximately 17 lbs. It has 5 blades and a cutting distance of up to 45 mm from 15 mm. It’s about.7′′ to 1.9′′ inches. This pushes a direction that is about 15 1/2 inches wide by 38 cm. The Brill has a silent cut feature, meaning that when the blades turn, the blades do not touch the cutter handle. It decreases friction, which makes the mower a little easier to drive, and also makes it much longer for the blades to go before they need any sharpening.
It’s incredibly simple to assemble the Brill. There’s no need for resources, and it takes up to five minutes. The chassis of the reel mower is already fully assembled. All you need to do is add the handle. The handle comes in three parts, as you can see from the photo at the top of the page. The bottom part of the mower body pops up on two metal connections. With wing nuts, the top two pieces of the handle are attached to each other.
Brill lawn mowers have several unique features that distinguish them from most other types of reel mower. They’ve got a job of painting powder coat. Here you can learn about the benefits of powder coating as opposed to plain old paint.
Brill reel mowers provide bearings that are sealed. This ensures you don’t have to bother about constantly oiling them, and so on. Brill reel mowers have polished, welded steel blades with fire. Combined with the non-contact silent cut design, this flamed hardened steel means you almost never have to sharpen the blades. Now and then you just have to change them.
The Brill reel mower ships with pre-adjusted blades, so initially you won’t have to mess with it. The manual of the Brill owner also comes with a small metal strip and a really complicated explanation of how the blades can be adjusted. The method works, but the German approach is a complicated one. I’ll tell you the easy way for America to do the same thing!
To customize the cutting height of the Brill reel lawnmower, an orange knob is found on each side of the mower body. On each side you will also find a measuring device that ranges between 15 mm and 45 mm. Just loosen the side of the orange knob, shift the height where you want it to fit on both sides, and clamp the orange knobs back down.
